Honda Talon 1000 Warrior Riser Snorkel Kit by SYA Warrior Riser

Exploring new terrain in your Honda Talon 1000X is a blast and when you want to be unstoppable, snorkeling your machine is a must. You won’t have to avoid the mud and muck; you can power through it with the Warrior Riser Snorkel Kit by Snorkel Your ATV. While going above your Everything Honda Offroad's factory water level recommendation isn't something we encourage, we know that you sometimes find yourself in a little deeper than you expected, so be prepared. With one three inch riser high above your head, your Talon can go deeper than you can... unless you are wearing snorkel gear.

Snorkel Your ATV is an expert in the field, you can be sure they have taken every aspect of the design of their kit into consideration. This aftermarket kit has been engineered to snorkel your CVT inlet, CVT outlet, air intake and all the vent lines without having to drill into your airbox or blocking any important air vent tubes. You will not be required to tune your sxs and the UTV kit comes with detailed color instructions that will take you through the install. When you are ready to go where you have never gone before, check out Everything Honda Offroad for our full selection of products for your Talon 1000R.

Warrior Riser Snorkel Kit Features:

• 3 inch snorkel kit with all hard pipe
• One (1) rear riser
• Fully snorkels machine , includes all vent lines and connectors required
• Warrior risers that slide and lock together for a strong, perfectly straight install
• Warrior risers have built in vent line slots to keep vent lines high, dry and secured cleanly
• Risers come in an all black finish but can easily be painted or hydro-dipped
• No tuning required
• Heavy duty rubber boots for easy disassembly
• Detailed color instructions with detailed pictures included for easy installation
• Comes standard with removable Warrior Wear tips
• Not required for use
• Easily cleaned and reusable, come unglued so you can custom paint them
• Easily glued with Locktite Stick'N Seal glue and can be glued with or without the water repellentpre-filter material
• CVT outlet SHOULD NOT have the water repellent material in place

LED Snorkel Accent Lights:

• Includes one 3" LED light
• LED Snorkel lights are a key on system, meaning they come on when you turn the key on the machine


PLEASE READ:- THERE ARE NO RETURNS OR REFUNDS ON THIS SNORKEL KIT. Risers come in ALL black only

Note:- All snorkel kits may required some cutting / drilling, which is standard for snorkel kits.