Honda Pioneer/Talon Complete Snow Plow Kit by Open Trail

Honda Pioneer/Talon Complete Snow Plow Kit by Open Trail

Clear your big driveway or move gravel, dirt, and more faster and easier than ever by adding this easy-to-install Snow Plow Kit! Open Trail uses only top-grade steel construction and quality-made components for year after year of reliable plowing.

Kit includes:

• (1) Plow Blade (your choice of size)
• (1) UTV Push Tube
• (1) Vehicle Specific Mount (make sure to select your correct vehicle above)

Important Notes:

• Does NOT include winch or winch mount
• Most Ranger Plow Mounts include lower 2" Receiver Hitch, some Ranger models and All General models do not
• Requires Stock Front Bumper
• 60" blades do not include 2-ply top rubber flap, must be purchased separately

All Plow Components Feature:

• Complete installation instructions included
• All mounting hardware included
• Powdercoated for maximum durability
• Unlike all other Plow competitors, our components are metal bead blasted before they are powder coated for the best possible finish prep.
• 100% Made in the USA

Straight Blade Specifications:

• Blade Constructed of 11-gauge steel
• Powder coated gloss black for supreme durability
• 2-Sided Steel Wear Bar that comes attached to the blade
• All blades include a 7" rubber flap and adjustable skids
• Blade face measure 16” Vertical and is approximately 21” with rubber flap installed
• All mounting hardware and complete installation instructions included

 Poly Hybrid Series Blade Specifications:

• Includes a 7" high 2-ply top rubber flap
• 100% MADE IN USA
• Dual Curvature face for supreme snow moving
• Measures 21” Vertical blade face height with an approximate 27” height with snow flap
• Fully-adjustable blade skids with bolt-on brackets
• Heavy duty 3"-diameter grade-50 steel skid plates
• Flexible Heavy Duty Black Poly face
• 3/16” Grade 50 Steel Rib and Frame construction
• Unlike all other Plow competitors our Plows are metal bead blasted before they are Powder Coated Black for supreme durability
• 2-Sided 3/16" x 3.00" Grade 50 Steel Wear Bar
• Wear Bar attached with Heavy Duty Grade 8 Bolts
• Complete installation instructions included
• Works with KFI ATV & UTV Tubes
• Includes Plow Markers

UTV Push Tube Specifications:

• Heavy Duty Square Steel Tubing
• Easy-Pull Pin Blade angle adjustment
• Multi-position Plow Lift Bracket
• 6 different blade pitch adjustments
• 3 blade angle positions
• Powder coated gloss black for supreme durability
• All mounting hardware and complete installation instructions included

Model Specific Plow Mount:

• Front-mount System
• Plate constructed from 3/16" grade 50 steel
• All pin tabs are constructed from 1/4" thick grade 50 steel
• All plow tabs are tapered to help reduce hang-ups while trail riding
• Powder coated black for supreme durability
• Complete installation instructions included
• All mounting hardware included

** Actual Plow Mount may look different than reference photo shown **

OPTIONAL ADD-ONS

4500 & 6000 Lb Winch Kit:

• Dash switch (4500 lbs)
• Wireless remote
• Durable three-stage metal-planetary gear system
• Heavy-duty electric permanent magnetic motor
• Automatic load holding self-locking brake
• Waterproof IP67 winch housing
• 3.0" x 4.875" mounting bolt pattern
• 39' of synthetic rope or steel cable

Model Specific Winch Mount: 

• Constructed of 3/16" Grade 50 steel
• Powder coated black for supreme durability
• Very easy to install
• Mounts winch tucked back behind front bumper
• Satisfaction guaranteed

Quick Plow Pulley & Soft Strap (106680/106470)

• #106680 Pulley: Features a 2-1/8" steel wheel to prevent cable damage and improve lift geometry, reducing electrical strain on your UTV.
• #106470 12" Soft Strap: USA-made heavy-duty webbing with a 3,200 lb break strength.

Hydraulic Actuator (Angle) Kit:

• Specifically designed for use with Open Trail Push Tube
• Parker Industries Made in the USA Electric (12 volt) over Hydraulic Cylinder
• Complete wiring kit with Carling Technologies Two-Way Dash Rocker Switch
• Powder Coated TOUGH

UTV Plow Tube Track Extension: 

• Designed to work with Open Trail UTV Tubes
• Constructed of Heavy Duty 1/4” Grade 50 Steel
• Extends UTV Blade 10.33”
• Shot Blasted before powder coating; Powder Coated TOUGH - Black

Plow Markers:

• Increase your blade end visibility for added safety
• Bolts to the side/ends of your blade
• Includes two markers
• Standard Blade Plow Marker Kit has a steel 89-degree angled base ; 15.5" length  0.5 " diameter
• Pro-Poly Plow Blade Marker Kit has a straight base

Flap Kit:

• 11-Gauge Steel Adjustable Snow Flap Edge Strip
• 6.5” 2-3ply Rubber Flap (acts as a snow flap as well as an extension to the plow blade)
• All KFI Blades are Pre-Drilled
• Two-way Adjustable

Side Shield:

• Attaches to the ends of the plow to help reduce snow and dirt overflow
• 3/16” Grade 50 Steel Powder Coated Black
• Pro-S Side Shield - Tapered Wing for Standard Blade -- Adds 2-1/4” Width to size of blade per Shield
  
• Pro-Poly Tapered Side Shield - Driver Side -- Adds 5.6” Width to size of blade per Shield
• Pro-Poly Tapered Side Shield - Passenger Side -- Adds 5.6” Width to size of blade per Shield

UTV SQ Push Tube Leveling Kit:

• Allows mounting of push tube at the correct height so the blade is level.
• Works with KFI UTV SQ Push Tubes (106300)
• Shot Blasted before powder coating ; Powder Coated TOUGH - Black
• 1" Negative SQ Push Tube Leveling Kit - For machines 8.5"-9.5"
• 1"- 2" UTV SQ Push Tube Leveling Kit - For machines 11.5" - 14"
• 4" Positive UTV SQ Push Tube Leveling Kit - For machines 14"-16"
• 6" Positive UTV SQ Push Tube Leveling Kit - For machines 16"-18"