Honda Talon 4 Door Enclosure (upper doors only) by SideXSide Enclosures

Honda Talon 1000X-4 / 1000R-4 (2020-2026+) Upper Door Enclosure by SideXSide Enclosures

This Honda Talon 4 upper door enclosure covers all four door openings on the four-seat Talon, using the hard roof, windshield, and rear window already on your machine. Heavy-duty ballistic material wraps the roll cage and runs across the top of each factory door, so the doors keep operating the way they do now. The one-time setup takes under an hour, and after that the panels come off in about a minute. Pick your attachment style in the drop-down before ordering.

What Is Included

• Included: upper door panels for all four door openings, all installation hardware, and a free storage bag.
• Not included: rear window, roof, or windshield. This kit is the upper doors only.
• Sold as a complete set. Individual panels and replacement zip-out windows are not sold separately.

Key Features

• Covers all four upper door openings on the four-seat Talon
• Heavy-duty ballistic material, custom made in the USA
• Works with the hard roof, windshield, and rear window already on the machine
• Windows unzip from the bottom so a door opens fully without unsnapping anything
• Wraps the roll cage and crosses the top of each factory door
• Three attachment styles: Velcro, self-adhesive snaps, or pop-rivet snaps
• Velcro sewn along most of the enclosure so you place the anchor points yourself
• Under an hour for the initial setup, then about a minute to take off or put back on
• Comes complete with everything needed for installation
• 1-year warranty on quality and workmanship

Fitment

• Honda Talon 4-seat models: 2020–2026+
• Requires a hard roof, windshield, and rear window on the machine

Important Fitment Notes

• Four-seat Talon models only. Two-seat Talons use a different enclosure.
• Upper doors only — there is no rear window or rear panel in this kit.
• Live Valve models: we have not been able to confirm fitment on Live Valve machines. Check with your dealer or call us before ordering if you have one.
• Side mirrors may not clear this enclosure. Enclosures are not customized for mirrors.
• No guarantee of adaptation with aftermarket accessories such as mirrors, light bars, or speakers.
• No guarantee is given on self-adhesive snaps or Velcro bonding to every surface. Pop-rivet snaps give the most secure attachment.
• Velcro and self-adhesive snaps can damage decals if applied over them. Mark your placement before peeling any backing.
• Use small pieces of Velcro rather than long strips — short sections adhere better, and the full length does not need to be covered.
• Remove the panels before trailering. Trailering with the enclosure installed will void the warranty.

Specifications

• Material: heavy-duty ballistic fabric
• Origin: custom made in the USA
• Coverage: upper doors only, all four door openings, sold as a set
• Vehicle fit: 2020–2026+ Honda Talon, four-seat models
• Required equipment: hard roof, windshield, and rear window
• Attachment: wraps around the roll cage and across the top of the factory door
• Attachment options: Velcro (no drilling), self-adhesive snaps (no drilling), or pop-rivet snaps (drilling required)
• Window operation: unzips from the bottom
• Initial installation: under 1 hour
• Removal or reinstall after setup: about 1 minute
• Included: all installation hardware and a storage bag
• MPN: Talon4UpperDoorEnclosure-XX
• Warranty: 1 year on quality and workmanship

Real Life Value and Uses

• Cut the wind blast that comes with Talon speed across open ground.
• Keep the back seats out of the dust when you are running mid-pack in a group.
• Stay dry when weather rolls in partway through a ride.
• Unzip a window for airflow instead of pulling a whole panel off.
• Keep grit off the seats and dash so cleanup takes minutes.
• Ride into the cold months instead of parking a four-seater until spring.
• Strip all four panels in about a minute for a warm weekend, then put them back.

Why Choose SideXSide Enclosures

• Over 30 years in the canvas business, building UTV enclosures since 2008
• Custom made in the USA, cut and sewn in Eastern Ohio
• Patterned for the four-seat Talon rather than adapted from another machine
• Three attachment options so you decide whether to drill
• Call in and you will usually reach the owner who drew the pattern
• 1-year warranty on quality and workmanship, repaired or replaced at our discretion

Match your Talon to the fitment list, pick your attachment style, and get all four doors closed in before the cold sets in — call us if you want us to confirm your machine first.